Skyrim Console Commands Carry Weight and Jump Height

November 15, 2026 · Cheat Codes, Open World
Quick answer: Skyrim console commands carry weight: player.setav carryweight 1000 sets it to 1000, while player.modav carryweight 500 adds 500. For jump height use setgs fJumpHeightMin <height>. PC only; open the console with ~.

Skyrim console commands carry weight changes through the carryweight actor value: player.setav carryweight 1000 sets your capacity, and player.modav carryweight 500 adds to it. Jump height is a game setting, changed with setgs fJumpHeightMin followed by a number.

This page extends the Skyrim gold console command guide. Commands were checked against the UESP console page and two community guides. The console only exists on PC; see the Skyrim Xbox console commands page for console options. More games are on all game cheat codes.

How to open the Skyrim console

Press the tilde key (~) on PC to open the console, type the command and press Enter. UESP says the console is only available to PC players.

  1. Load your save and make sure you are not in a menu.
  2. Press ~. It sits below Esc on a US keyboard, and UESP lists other keys for non-US layouts.
  3. Type the command exactly. Commands are not case sensitive.
  4. Press Enter. Press ~ again to close the console.
Before you use commands: UESP advises making a permanent save before using the console. One guide reports that console use disables Steam achievements for that session in the Special Edition and Anniversary Edition.

Skyrim console commands for carry weight

Type player.setav carryweight 1000 to set your capacity to 1000. The number after carryweight is the new base value. UESP gives this as its example and notes the correct spelling is carryweight, not carrywieght.

The other route is player.modav carryweight 500. It registers a modifier, so 500 is added to what you have. Guides also give player.modav carryweight 1000 as adding 1000 to your capacity. UESP warns that RestoreActorValue does not undo values changed with modav, forceav or setav.

  • Default capacity is 300, according to Beebom. Search results note that some races start higher, with Orcs at 380.
  • Beebom says you can raise the value above your own weight with no walking speed penalty.
  • Use setav to land on an exact number, and modav to add to the current one.
  • Another command listed by Beebom, player.modav burden X, makes you heavier. Do not use it by accident.

How to use modav carryweight, step by step

  1. Open the console with ~.
  2. Type player.modav carryweight 500 and press Enter.
  3. Open the inventory and check the weight bar. Modified attributes show in green by default.
  4. To correct a mistake, enter the same command with a negative number, for example player.modav carryweight -500.

Skyrim console commands for jump height

Use setgs fJumpHeightMin <height>. UESP shows this as the way to change the player's jump height. Set a number, jump in game and adjust it.

The default value and the unit are not stated by the sources reviewed. Some guides suggest values like 200 or 400 for a higher jump, but without a confirmed baseline they should be treated as a starting point. Raise the value in small steps, because very high numbers can launch you into places you cannot leave.

  • setgs is the Set Game Setting command. It changes a setting for the current game session.
  • UESP does not say whether the change carries over after you reload, so re-enter it after loading.
  • The related commands refini and saveini reload and save settings from the ini file. Use them only if you know what they overwrite.
  • Carry weight does not directly change jump height, though being overencumbered can still limit sprinting.

Carry weight and jump height command table

Command What it does
player.setav carryweight 1000 Sets your carry weight to 1000.
player.modav carryweight 500 Adds 500 to your carry weight as a modifier.
player.modav carryweight -500 Removes 500 from the modifier.
player.forceav carryweight <value> Forces the attribute to a stated value through a modifier (UESP).
setgs fJumpHeightMin <height> Changes the player's jump height.

Skyrim carry weight and jump commands on Xbox and PlayStation

Xbox and PlayStation have no console, so these commands do not apply there. UESP lists a third-party Debug Menu mod that allows console commands on Xbox One. Check the Skyrim Xbox guide before installing mods.

Other Skyrim console guides

Change perks with the Skyrim perk points console command. If you play other Bethesda RPGs, compare the Oblivion Remastered console commands, the Morrowind console commands and the Starfield console commands.

Why Skyrim carry weight and jump commands are not working

  • Typo: the attribute is spelled carryweight, with no extra letters.
  • Command ignored: you need the player prefix for actor values, as in player.setav.
  • Carry weight went up too much: use player.modav carryweight -500 to take it back, since RestoreActorValue will not.
  • Jump unchanged: setgs affects a game setting, so enter it after loading the save.
  • Console will not open: use the right key for your layout, and check you are on PC.

Skyrim carry weight and jump height FAQ

What is the Skyrim console command for carry weight?

Use player.setav carryweight 1000 to set your carry weight, or player.modav carryweight 500 to add 500 to it. Both work on PC after opening the console with ~.

What is the difference between setav and modav carryweight?

setav sets the base value to the number you type. modav adds a permanent positive or negative modifier on top of it. Modified attributes show in green in the inventory.

What is the Skyrim console command for jump height?

Type setgs fJumpHeightMin followed by a number. UESP shows this as the jump height command. Increase the value gradually and test it in game.

What is the default carry weight in Skyrim?

Beebom gives 300 as the default. Some races start higher, and perks, potions and gear can change it. Use setav to replace the number or modav to add to it.

Does the carry weight command work on Xbox or PlayStation?

No. The console is PC only. UESP mentions a third-party Debug Menu mod that allows commands on Xbox One, but it is not an official feature.

Do console commands disable achievements in Skyrim?

One guide reports that using the console disables Steam achievements for the session in Special Edition and Anniversary Edition. Save before experimenting.

Sources

  • UESP – Skyrim: Console
  • Beebom – Best Skyrim console commands
  • Carl's Skyrim Guide – Cheats
  • WePC – Skyrim console commands (via search summary)

Leave a Reply

Your email address will not be published. Required fields are marked *